terawins T515A
The T515A is a low-power mixed signal SDTV Video Decoder that provides major cost saving solution for the LCD applications. With built-in high performance Dual ADCs, Chroma Phase Locked Loop, Automatic Sync Tip Slicer and 2-D Comb Filter, T515 can separate Luma and Chrom signal as true as no cross luma and cross chroma effects. With effective signal demodulator, Cb/Cr data can be obtained from Chroma signal. ITU-R BT.656 data or 8 bit 4:2:2 data with sync signal are selected as data output.
Features
SDTV system video Decoder
- 2D Comb Filter video Decoder
- Accepts NTSC(M), PAL(B,D,G,H,I,N,CN), and SECAM video data
- Accepts Composite and S-video signals
- Versatile VBI Data Decoder
- Supports Close Caption, Wide Screen Signaling and Teletext
- Cost Effective Highly Integrated Dual ADC + 2D Video Decoder + VBI Data Decoder
- Integrates 9-bit Dual Analog to Digital Converters (ADC) & Phase Locked Loop (PLL)
- Multi-standard color decoder with 2D adaptive comb filter
- Innovative and flexible design to reduce total system cost
- Power down mode available
Triple 9-bit Analog to Digital Converters (ADC)
- 27MSPS Conversion Rate
- Built-in Pre-amp, mid-level & ground clamp circuit
- Automatic Clamp Control for CVBS, Y and C
- Programmable Static Gain Control or Automatic Gain Control for CVBS or Y/C
- Max Input configuration up to 4xCVBS, 2xS-video inputs
Digital Video Enhancement
- Separate Luminance and Chroma Enhancer
- Y Supports Luminance Peaking, Contrast and Brightness adjustment
- C Supports DCTI, Saturation and Hue adjustment.
- Horizontal active data adjustment and black color insertion
- Flexible Data Output Format
- 2 configurable output modes:
- 27Mhz 8-bit ITUR BT.-656 mode
- 27Mhz 8-bit 4:2:2 data with sync signals
System Interface
- Crystal Oscillator Circuit
- Direct interface to a (27.0MHz) Crystal
- Also provide a buffered clock output for ITU656 decoder.